EXP Computer PathBuilder S200 - Manual (Page 84)

80 Bridging
Bridge Filtering
Configure NetBIOS
Name Filter Table Figure 41 highlights the NetBIOS Name Filter Table selection in the Configure
Bridge menu.
Figure 41. Configure Bridge Menu
Configuring
NetBIOS Name
Filter Table To configure the NetBIOS Name Filter Table, follow these steps:
Node: Address: Date: Time:
Menu: Configure Bridge Path: (Main.5.22)
Bridge Parameters
Bridge Link Parameters
MAC Address Filter Table
Protocol Filter Table
NetBIOS Name Filter Table
LSS Parameters
LLC LT Station Table
LLC LT WAN Parameters
LLC LT Profile Table
#Enter Selection:
Step Action Result
1 Select Configure -> Configure
Bridge ->NetBIOS Name Filter
Table
. from the CTP Main menu.
The first entry of the NetBIOS
Name Filter Table appears.
Note
You can enter up to 255 entries in
the table. Each entry can be a
wildcard pattern that matches a
class of servers used in an
organization.
2 Complete the record by configuring
the parameters using the description
shown in the “Parameters” section
on page 81”.