EXP Computer PathBuilder S200 - Manual (Page 142)

138 Bridging
Bridge Statistics
Description of
Screen Terms This table describes screen terms for pages 1 and 2 of the Detailed LAN Connection
Statistics shown in Figures 65 and 66.
Term Description
Call Summary This field provides information about the following:
• Connection Type: Specifies whether the connection is
an SVC or a PVC.
• Connection State: Specifies the current state of the
PVC or SVC.
Possible states are: Unconfigured; Calling; Waiting;
Connected; Autocall Failure; Software Disabled;
Operator Disabled; Congested. This means either the
Frame Relay link is receiving BECNs or the node is
running low on Data Buffers. Or, if the LCON queue
backs up due to too much traffic passing from the
LAN to the WAN, the connection state may be
Congested.
• Forwarders Connected: Specifies which forwarders
are currently connected to this LAN Connection:
Source Route; Spanning Tree).
• Remote Address: Specifies the called address of the
remote WAN Adapter LAN Connection for connected
SVCs. The possible states are: Blank for PVCs; blank
for disconnected SVCs; No Mnemonic (for autocall
SVCs whose mnemonic does not exist in the
Mnemonic Table); Max Attempts (for Autocall SVCs
that reached their autocall maximum attempts count).
• Number of auto call attempts: Specifies the number of
times the WAN Adapter attempted to autocall before
it either succeeded or failed in establishing the
connection.
• Last clear cause code: This is the cause code in the
call clear packet last received by the LAN connection
and explains why the last call was cleared.
• Last clear diagnostic code: This is the diagnostic code
in the call clear packet last received by the LAN
connection and explains why the call was cleared.