EXP Computer PathBuilder S200 - Manual (Page 127)

Bridging 123
T0008-16F Release 5.2M
LAN Server Subsystem
*Virtual Bridge ID
Range: 0 to 15
Default: 0
Description: Represents the bridge ID of a virtual source routing bridge that
connects the local TR LAN to the virtual TR LAN.
*Path Trace Control
Range: ENABLE, DISABLE
Default: DISABLE
Description: Specifies whether or not the LBS is enabled to send the Path Trace
notification frames to the IBM LAN Network Manager.
*Functional Address Mask
Range: 00000000 to 7FFFFFFF (hexadecimal)
Default: 0000001A
Description: Used to enable or disable the LSS servers and represents a 31-bit
map of functions where a specific bit identifies a function such as
Configuration Report Server (CRS). Relevant bits should be set if
the node supports these functions.
• Configuration Report Server (CRS) = 00 00 00 10
• Ring Parameter Server (RPS) = 00 00 00 02
• Ring Error Monitor (REM) = 00 00 00 08
Note
The LSS contains an LBS that is always enabled. A Node Boot is
required to enable or disable the servers.