EXP Computer PathBuilder S200 - Manual (Page 73)

Bridging 69
T0008-16F Release 5.2M
Bridge Filtering
Outgoing Destination Address Link Action
Range: PASS, BLOCK, PASSLIST, BLOCKLIST
Default: PASS
Description: The Outgoing Destination Address link provides a path for a frame
to go from the bridge to the LAN. It allows a device on a Token
Ring to receive frames.
• PASS: Pass outgoing frames with this MAC Address value on
all links that are referencing this table. If this value is chosen,
this filter is fully configured and the next prompt would wrap
to MAC Address to allow further configuration of this record.
If this value is chosen skip the List of Links parameter.
• BLOCK: Block outgoing frames with this MAC Address
value on all links that are referencing this table. If this value is
chosen, this filter is fully configured and the next prompt
would wrap to MAC Address to allow further configuration of
this record. If this value is chosen, skip List of Links
parameter.
• PASSLIST: If this value is used, a pass filtering list is
specified by the parameter List of Links. Links in this list pass
the frame. Links not in this list block the frame.
• BLOCKLIST: If this value is used, a block filtering list is
specified by the parameter, List of Links. Links in this list
block the frame. Links not in this list pass the frame.
List of Links
Range: 1,5, to 36
Default: (no entry)
Description: Each entry is a bridge link number in the range 1, 5, to 36. The
individual numbers correspond to the links that filter according to
the preceding parameter. If the preceding parameter is:
• PASSLIST: The listed links pass the frame and unlisted links
block the frame.
• BLOCKLIST: The listed links block the frame and unlisted
links pass the frame.
This parameter appears only when the parameter Outgoing
Destination Address Link Action = PASSLIST or BLOCKLIST.