EXP Computer PathBuilder S200 - Manual (Page 111)

Bridging 107
T0008-16F Release 5.2M
LLC2 Local Termination
Configuring the LT
Station Table These parameters make up the LT Station Table.
2 Configure all of these LT configu-
ration options. Choose one to
begin.
• LLC LT Station Table
Then:
Go to “Configuring the LT
Station Table” for details.
LLC LT Station Table
Configuration appears.
• LLC LT WAN Parameters
Then:
Go to the section
“Configuring the LT WAN
Parameters."
LLC LT WAN Configuration
appears.
• LLC LT Profile Table
Then:
Go to the section
“LLC LT Profile Table
Configuration.”
LLC LT Profile Table
Configuration appears.
Step Action (continued) Result
Entry Number
Range: 1 to 64 stations
Default: 1
Description: Entry number used to reference this table.
Boot Type: N/A
Local MAC Address
Range: 00:00:00:00:00:01 to 7F:FF:FF:FF:FF:FF
Default: 00:00:00:00:00:80
Description: MAC address must match the source MAC address of the frame
received from the LAN port or the destination MAC address of a
frame received from the WAN for the session to be spoofed. If you
are using Local Termination Autolearn, specify the remote MAC
address.
Boot Type: LLC LT Station