EXP Computer PathBuilder S200 - Manual (Page 29)

Bridging 25
T0008-16F Release 5.2M
Configuring the PathBuilder S200 Series Switch for Bridging Operation
Note
If STPE Control parameter value is AUTO, this parameter appears.
Bridged Protocols
Range: None, IP, IPX
Default: None
Description: Specify the routable protocols that can be bridged across BROUT
or BRID links. “None” specifies no routable protocols (IP, IPX)
will be bridged. “IP” specifies that IP packets can be bridged.
“IPX” specifies that IPX packets can be bridged.
Note
Any combination of the available selections may be specified by
summing, such as IP + IPX.