EXP Computer PathBuilder S200 - Manual (Page 129)

Bridging 125
T0008-16F Release 5.2M
Bridge Statistics
Spanning Tree Statistics
Spanning Tree
(STPE) Status Figure 58 shows the information displayed by the Spanning Tree Status report.
Figure 58. Spanning Tree Status
Descriptions for
the Spanning Tree
Status report This table describes the screen terms for the Spanning Tree Statistics report.
Node: Address: Date: Time:
Spanning Tree Statistics Page: 1 of 1
STPE Bridge ID: 00:ff:ff:ff:00:00:00:00 Root Bridge ID: 00:ff:ff:ff:ff:ff:ff:ff
Root Path Cost 03 Root Port: Bridge-Link
Max Age: 0 Forward Delay: 0
Last Topological Change 09-AUG-1993 08:21:33
Topological Changes 0
Bridge-Link State Priority Path Cost
___________ _____ ________ _________
1 Forwarding 128 1
5 Forwarding 128 1
Term Description
STPE Control Configured value of STPE Control. If STPE is configured for
MAN, the rest of the parameters are not displayed.
STPE Bridge ID The value of the bridge ID which is transmitted by the bridge
in STPE PDUs.
Root Bridge ID The root of the spanning tree as determined by the STPE.
Root Path Cost The cost of the path to the root as seen from this bridge.
Root Port The bridge link number that offers the lowest cost path from
this bridge to the root bridge.
Max Age The actual Max Age timeout value that this bridge is
currently using.
Forward Delay The actual Forward Delay value that this bridge is currently
using. The amount of time before sending a regular
(non-spanning tree) frame.
Last Topological
Change The time when the last topological change was detected.
Topological
Changes The number of topological changes since the last reset or
restart.
Bridge Link Number of specified bridge link.