EXP Computer PathBuilder S200 - Manual (Page 42)

38 Bridging
Configuring the PathBuilder S200 Series Switch for Bridging Operation
Figure 18. Translational Bridging Example
Figure 19 shows a situation where a PathBuilder S24x, 26x, and 27x switch is
configured for translational bridging with SVCs/PVCs originating from two remotes.
Multiple remote Ethernet and Token Ring LANs may attach to the local Token Ring
via the PathBuilder S24x, 26x, and 27x switch with Translational Bridging.
Figure 19. Translational Bridging Point-to-Point Example
PVC
PB S200 Switch
Station A Station B
Port 13 Port 19
Port 13
Port Type: ETH
Bridge Link Number: 1
Port 19
Port Type: TR
Ring Number: 1
Bridge Link Number: 2
Ethernet
Bridge
Link 1
Transparent
Bridge
Bridge
Link 5
LCON
1
LCON
2
Bridge
Link 6
Source
Bridge
Bridge
Link 2
Token Ring
Bridge Link 5
Bridge Type: TB
LAN Connection 1
LAN Forwarder Type: BRID
Bridge Link Number: 5
Bridge Link 6
Bridge Type: SR
Link Mode: TRANS
Virtual Ring Number: 2
LAN Connection 2
LAN Forwarder Type: BRID
Bridge Link Number: 6
Network Services PVC Setup Table
Source: LCON-1
Destination: LCON-2
SVC
PB S200/Node 100
Station A Station B
Port 13
Port 13
Port 13
Port Type: ETH
Bridge Link Number: 1
Port 19
Port Type: TR
Ring Number: 1
Bridge Link Number: 1
Ethernet
Bridge
Link 1
Transparent
Bridge
Bridge
Link 5
LCON
1
LCON
1
Bridge
Link 5
Source
Bridge
Token Ring
Bridge Link 5
Bridge Type: TB
LAN Connection 1
LAN Forwarder Type: BRIDG
Bridge Link Number: 5
Remote ID:
1
Bridge Link 5
Bridge Type: SR
Link Mode: TRANS
Virtual Ring Number: 2
LAN Connection 1
LAN Forwarder Type: BRID
Bridge Link Number: 5
Bridge
Link 1
X.25/FR Annex G
PB S200 Switch w/Translational
Node 200