ARRI ALEXA Mini LF Ready to Shoot V-Mount Set (LPL) - Manual (Page 81)

Monitoring 81
Width
Height
Offset Left
Offset Top
Reset All
Adjusts the user rectangle width in the range of 0-999.
Adjusts the user rectangle height in the range of 0-999.
Adjusts the horizontal user rectangle offset in the range of 0-1000.
Adjusts the vertical user rectangle offset in the range of 0-1000.
Resets all values.
4. Configure the user rectangle according to your needs.
5. To reset the configuration, press
Reset all .
Frame Lines Saved in Metadata
The camera records up to six rectangular frame lines from the active frame line files into metadata. This
metadata is present in all recording formats and on all HD-SDI outputs. The frame line metadata can be
used either for automatic dailies creation or for displaying the frame lines in post.
Automated Dailies Creation
It is possible to load two frame line files simultaneously into the camera for a total of six frame lines
displayed in the viewfinder or on MON OUT. In metadata, the frame lines of the first file will be called
frame line 1A, frame line 1B and frame line 1C, while the frame lines of the second file will be called
frame line 2A, frame line 2B and frame line 2C. Frame line 1A is automatically the master frame line.
The master frame line can be used by dailies creation software to automatically frame the dailies. This
feature is expected first on the Codex Vault, but other dailies creation software is expected to follow
suite.
Frame Lines in Post
The frame line metadata makes the original camera frame lines available during post production for
editing, color grading or compositing tools and can be displayed as an overlay in the respective image
viewer.
NOTICE
Frame lines created for a sensor mode other than the currently active are not selectable.
18.5 Anamorphic Desqueeze
Setting the Lens Squeeze Factor
The lens squeeze factor determines the factor that is used for anamorphic desqueeze on EVF/Monitor
and SDI. This value is also written into the metadata of the clip and allows video players and editing
software to automatically desqueeze clips that have been shot with anamorphic lenses.
► Select
MENU > Recording > Project Settings > Lens Squeeze Factor and select the appropriate
factor.
Anamorphic desqueeze is automatically activated on EVF/Monitor and the SDI outputs.
Activation of Anamorphic Desqueeze for EVF/Monitor and SDI
With the desqueeze factor defined in the project settings, anamorphic desqueeze can be then enabled
and disabled for EVF/Monitor and SDI so that the image is displayed with the correct aspect ratio.
1. You have the following options:
Select MENU > Monitoring > EVF/Monitor > Anamorphic Desqueeze .
Select MENU > Monitoring > SDI > Anamorphic Desqueeze .