ARRI ALEXA Mini LF Ready to Shoot V-Mount Set (LPL) - Manual (Page 31)

Lens Mounts and Lens Handling 31
11.3 Maximum Lens Mounting Depth
To avoid damage or injury when using LPL mount lenses or PL mount lenses (with PL adapter on LPL
mount), use only lenses that do not exceed the following dimensions:
LPL mount lenses: PL mount lenses:
NOTICE
Risk of damage and injury from improper lenses!
To ensure maximum allowable lens mounting depth, and to avoid damage or injury, always have
your camera shimmed correctly.
LPL mount lenses with more than 18.00 mm mounting depth and PL mount lenses with more
than 38.50 mm mounting depth might damage internal filters and the camera. Shards from
broken filter glass might cause injury. Always check the lens mounting depth before mounting or
changing a lens.
11.4 Changing the Lens Mount
The ALEXA Mini LF is equipped with a universal lens mount base that uses the same camera to lens
mount interface as used on the ALEXA Mini and AMIRA, so all lens mounts that fit on ALEXA Mini and
AMIRA will physically also fit on the ALEXA Mini LF. However, since most of those lens mounts have
been designed for a Super 35 sensor, they will show vignetting in larger format.
Required Tools and Precautions
3.0 mm Allen key
Camera switched off and power source disconnected
Lens removed and properly stored
Make sure to protect all optical surfaces when changing a lens mount