FlashForge Adventurer 3 Pro 2 3D Printer - Manual (Page 8)

The surface on which the Adventurer 3 Pro 2 builds an object
Build Tape
Build Plate
The black tape that covers Adventurer 3 Pro 2’s build plate so
that the object can stick to the build plate well
Build Volume
The dimensions of the space into which 3D prints can be
produced. The largest build volume is 150*150*150mm.
Extruder
Nozzle
Cooling Fan
Filament Cartridge
Filament Guide Tube
Filament Intake
Solid Glue Stick
The integral extruder assembly is installed on X-axis.
The extruder draws the filament from the filament spool,
melts it and extrudes it through the nozzle into the build plate.
Also called ‘print head’, which is located at the bottom
of the extruder where heated filament is squeezed out.
A specific box for placing Flashforge filament, which is
located on the right of the printer.
A white plastic tube that guides the filament from the
filament box to the filament intake
A solid adhesive used for making the model stick to the
build plate firmly
To cool the outer assembly of the extruder and gear motor
An opening located at the top of the extruder
Terms
05