FlashForge Adventurer 3 Pro 2 3D Printer - Manual (Page 6)

Operating Environment Requirements
Equipment Placement Requirements
Filament Requirements
Filament Storage
Legal Notice
Temperature: RT 15-30 ℃; Moisture: 20%-70%
The device must be placed in a dry and ventilated environment.
The distances of the left, right and back side space should be at least 20cm, and
the distance of the front side space should be at least 35cm. Device storage
temperature: RT 0-40 ℃
Please make sure you use the Flashforge filament or the filament from the brands
accepted by Flashforge.
Nozzle clogging and damage may be caused by non-Flashforge filament due to
inappropriate material properties.
All the information in this document is subject to any amendment or change without
the official authorization from Flashforge.
Flashforge makes no warranty of any kind with regard to this document, including,
but not limited to, the implied warranties of merchantability and fitness for a particular
purpose.
Flashforge shall not be liable for errors contained herein for incidental consequential
damages in connection with furnishing, performance or use of this material.
This document contains proprietary information protected by copyright.
Copyright 2023 Zhejiang Flashforge 3D Technology Co., Ltd. All rights reserved.
All polymers degrade with time. Do not unpack the filament unless it is required for use.
Please keep the storage environment dry and dust-free.
03