FlashForge Adventurer 3 Pro 2 3D Printer - Manual (Page 14)

11
1. Manually pull the platform base inside the
machine outward slightly to a suitable
position.
2. Take out a PEI build plate from the accessories, and align the side with a groove
inward with the two locating pins on the platform base.
3. When the locating pins just press against the
groove of the platform plate, align the platform
plate with the base along the outline of the
platform base, and lightly place the platform
plate and attach it on the platform base to
complete the installation.
Both sides are available. The gold PEI side
can be used to print PLA/PLA-CF/PETG-CF
High-Speed PLA. The other side can be used
to print PETG/High-Speed PETG. Please
choose according to the printing material.
Note
2.3 PEI Build Plate Installation
Platform base
Locating pins
PEI Flexible
Build Plate