FlashForge Adventurer 3 Pro 2 3D Printer - Manual (Page 49)

3. Connect Adventurer 3 Pro 2 to the Internet. Choose the proper connecting way in the Network
interface [the details of connection methods can be found in the previous chapter].
4. Connect Adventurer 3 Pro 2 to the Polar Cloud.
After the connection is completed, you can see the camera images on the home page of
Polar Cloud.
1. Make sure the printer is connected to the Internet.
2. Make sure the camera function is enabled. [There
should be a camera icon in the Status Bar.]
Enter the cloud connection interface [click
Tools - Network - Cloud], and turn on the
Polar Cloud switch [After it is turned on,
the switch will display green]. Fill in the
Account and PIN bars with the registered
account before and the PIN code queried
before, and then click [Save].
Notice
Polar Cloud
switch
PolarCloud
Account:
PIN:
Save
46