FlashForge Adventurer 3 Pro 2 3D Printer User Manual
Page 56
Q20. Adventurer 3 Pro 2 starts printing when the distance between the extruder and the build
plate is still large, causing filament can not stick to the build plate and printing failure.
Please perform calibration or homing again. Then start printing to check results.
Q21. After inserting the USB flash drive, the print files can not be found. How to solve it?
The format of the USB flash drive is incorrect. Adventurer 3 Pro 2 only supports FAT32 file
system. Please format the USB flash drive into FAT32 format.
Daily Maintenance Instruction:
When the printer is idle for a long time, please apply lubricating oil to the guide rails. Or
regularly apply lubricating oil on the guide rails or lead screws every other month.
53