FlashForge Adventurer 3 Pro 2 3D Printer - Manual (Page 5)

Work Environment Safety
Electrical Safety
Personal Safety
Cautions
Keep your work place tidy.
Do not operate the printer in the presence of flammable liquids, gases or dust.
Keep the printer out of children and untrained people’s reach.
Always use the printer with a properly grounded outlet. Do not refit Adventurer 3 Pro 2 plug.
Do not use the printer in damp or wet locations. Do not expose the printer to burning sun.
In case of device damage, please use the power cord provided by Flashforge.
Avoid using the device during an thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after finishing printing.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
Do not operate the device while you are tired or under the influence of drugs, alcohol or
medication.
Do not leave the device unattended for long.
Do not make any modifications to the device.
Lower the build plate before loading/unloading filament.
[The distance between the nozzle and build plate should be kept for at least 50mm.]
Operate the device in a well-ventilated environment.
Never use the device for illegal activities.
Never use the device to make any food containers.
Never use the device to make any electrical appliance.
Never put the model into your mouth.
Do not remove the models with brute force.
Safety Notice: PLEASE READ AND STRICTLY FOLLOW ALL THE
SAFETY WARNINGS AND NOTICE BELOW.
Notice
02