FlashForge Adventurer 3 Pro 2 3D Printer - Manual (Page 15)

2.4 Printing
2.4.2.1 Leveling and Calibration
12
2.4.1 Software Installation
2.4.2 Equipment Preparation
3D printing process is as follows:
(1). Obtain the 3D file; (2). Download and install the slicing software;
(3). Prepare the equipment; (leveling, calibration and filament loading);
(4). Start printing (model file slicing, transmission and printing).
Find the FlashPrint software installation package in the USB flash drive, and select the
corresponding system version for installation. As the software will be updated regularly,
please pay attention to the update status of the software. The latest slicing software can
be downloaded from the official website (www.flashforge.com) - [Support] - [Download
Center] - [Software].
Note
The equipment has been leveled and calibrated before leaving the factory, but the
leveling plane may be damaged due to the vibration generated during transportation.
It is recommended to perform a calibration before first use.（This step is optional.）
Click [Tools] - [Setting] - [AutoCalibration] and operate following the on-screen prompts.
Build
Tools
Filament
4/4
< <
Network
NozzleCheck AutoCalibration
Preheat
Setting About