Datavideo PTR-10 MK II Robotic Head & RMC-180 MK II Pan/Tilt Controller Kit - Manual (Page 34)

34
4.6 Zoom Sensor mini-DIN Port
The zoom sensor mini-DIN port allows you to connect the ZEK-1 Zoom Encoder Kit, which is an
electromechanical device that adds automatic zoom positioning to the camcorder mounted on PTR-
10/10T MARK II Robotic Pan Tilt Head. See the
ZEK-1 user manual for installation instructions.
With the ZEK-1 installed, you can set P/T Acceleration and P/T Speed to Auto (recommended) for
smooth PTZ camera control.
The P/T Acceleration defines the rate at which the pan and tilt movement will reach its top speed.
When set to
Auto , the acceleration changes according to the zoom direction. When zooming out,
the acceleration increases for responsive PTZ movement; when zooming in, the acceleration
decreases for smooth PTZ movement.
The P/T Speed defines how fast or slow the pan and tilt movement will be. The PTR device offers 18
levels of speed of P/T movement. When set to
Auto , the speed changes according to the zoom
direction as well. When zooming out, the speed will be automatically increased to 18 for responsive
PTZ movement. When zooming in, the speed will be automatically decreased to a value in the range
between 3 and 6 for smooth PTZ movement.
To set P/T Acceleration and P/T Speed, follow the menu paths below:
Setting P/T Acceleration to Auto Setting P/T Speed to Auto
Set Motor
 P/T Acceleration
 Auto
Set Motor
 P/T Speed
 Auto