Datavideo PTR-10 MK II Robotic Head & RMC-180 MK II Pan/Tilt Controller Kit - Manual (Page 19)

19
Remote Port
The Remote port, when connected to the camera mounted , allows you to access certain functions of
various camera brands such as ZOOM and FOCUS . To use this function, you will need to first enable
LANC or BX-Lens mode by accessing the OSD menu option, Remote Out Mode , on your PTR-10
MARK II device. Follow the menu path below:
4. Remote Control
 6. Set Remote Out
 1. Remote Out mode
 LanC or BX-Lens
LANC
If the LANC mode is enabled, connect the Remote port of PTR-10 MARK II to the camera’s 2.5 mm
earphone jack via a remote cable. The remote cable is an 8pin mini-din to 2.5mm phone jack cable as
depicted below. The pinout information is also shown.
8pin mini-din 2.5mm phone jack
1 1
6
8
3 2
4 3