Datavideo PTR-10 MK II Robotic Head & RMC-180 MK II Pan/Tilt Controller Kit - Manual (Page 26)

26
No. Buttons Descriptions
10
Auto Iris Control
Make the subject appear brighter
Adjust the iris opening (aperture), to control the amount of light
coming through the lens (i.e. the "exposure"). Press IRIS+ button to
enlarge the iris opening to allow more light to come in so that the
subject appears brighter and press IRIS- button to shrink the iris
opening to allow less light to come in so that the subject appears
less bright.
To cancel the function or return to default setup, press the Auto
button.
11
ENTER
ENTER
Menu ENTER key
12
Direction Arrows
Change camera direction
Press arrow buttons to change the direction of the camera head.
Stop Preset Point Auto Scan mode
Press any of the DIRECTION buttons.
Select Menu Option
Press UP or DOWN arrow button to select menu options.
Enter/Exit Sub-Menu Option
Press ENTER or RIGHT arrow button to enter sub- menu; press LEFT
arrow button to leave sub-menu.
Adjust Setup Value
Press UP or DOWN arrow button to adjust parameter values.
13
Menu Button
Enter or Exit Menu Options
14
Zoom In / Out
Buttons
Zoom
Press either (T) TELE button to zoom in on the subject such that it
appears to be close to the camera or (W) WIDE button to zoom out
from the subject such that it appears to be far away from the
camera.