Datavideo PTR-10 MK II Robotic Head & RMC-180 MK II Pan/Tilt Controller Kit - Manual (Page 25)

25
No. Buttons Descriptions
5
Position Setting
Various combinations of settings (position, zoom, focus, gain
control and iris control) can be saved to presets using the number
keypad.
Adjust Preset Point
Adjust position, zoom, focus, gain control and iris of the camera.
Set up Preset Point
Press any of the preset numbers 1~50 and then press the SET
button (see the SET button description).
Recall saved setting
Press any of the preset numbers 1~50 and then press the PRESET
button (see the PRESET button description).
Set up Group Scan mode
Press any of the group numbers 1~8 and then press the GROUP
button (see the GROUP button description).
Return Camera Lens to the Front
Press number 0 and then press PRESET button.
6
Focus Setup
Manually focus camera lens on a subject
Press either (F) FAR button or (N) NEAR button to manually focus
the camera lens onto the subject.
7
Auto Focus Control Automatically focus camera lens on a subject
Press the Auto FOCUS button to automatically focus the camera
lens onto the subject such that it is positioned at the center of the
screen.
8
Gain Control
Adjust Brightness
Press GAIN+ button to increase the brightness or GAIN- button to
decrease the brightness of the environment.
To cancel the function or return to default setup, press the Auto
button.
9
P/T Speed Adjust Pan/ Tilt Speed
Press SPEED + / - button to switch to adjust Pan/Tilt speed
(up/down).