Datavideo PTR-10 MK II Robotic Head & RMC-180 MK II Pan/Tilt Controller Kit User Manual
Page 11
11
9
RS-232/422 OUT
Connects to the camera mounted, relaying serial control signals
between the camera and controllers via RS-232 or RS-422 interface,
which is selectable through the
10
DVIP
DVIP port connects the PTR-10 MARK II to an Ethernet switcher or
router for remote control. An example of the controller utilizing
DVIP port is RMC-300A.
See the section on
for detailed descriptions and example
system setup.
11
Zoom Sensor mini-DIN port
Connects to Datavideo’s ZEK-1 Zoom Encoder Kit in order to detect
and return zoom position of the camera mounted. See the
ZEK-1
user manual
for installation instructions and the
section for more information about using the ZEK-1 to
achieve smooth and responsive PTZ camera control.
12
REMOTE
Connect through a remote cable to various camera brands in order
to control camera’s zoom and focus as well as other functions. See
the
section for cable pinout information, connection
instructions as well as a list of compatible cameras.
Note:
A remote cable (8pin mini-din to 2.5mm phone jack)
accompanying the PTR-10 MARK II is designed for connecting to
various camera brands.
Warning: The 8pin snap-and-lock mini-din connector of the remote
cable will be securely fastened once plugged into the Remote port.
To remove, use two fingers to gently hold the part of the plug
labelled by two arrows then pull the connector outward
.
13
Tally IN
Receives tally information from external devices such as a video
switcher.