Datavideo PTR-10 MK II Robotic Head & RMC-180 MK II Pan/Tilt Controller Kit - Manual (Page 27)

27
No. Buttons Descriptions
15
Zoom Speed Button
(4 speed selection)
Adjust Zoom In/Out Speed
Press button 1/2/3/4 to switch between different speeds with 1
being the highest and 4 being the lowest.
16
Standby Button
Press to enter PTR-10 MARK II into standby mode and press again
to wake the device from standby mode.
OSD Menu
The OSD menu allows you to modify various device settings such as pan and tilt and control
protocols. Press the menu button on your remote control opens the OSD menu shown below.
The table below summarizes the main option items and their sub-options.
Main Options
Set Motor Memory Video Mode Remote Control System Reset P/T Escape
Sub
-O
p
ti
o
n
s
1. P/T
Acceleration 1. Preset
Position 1. Selection
Way 1. PAN/TILT
Reverse
1. Display
1. Reset
Pan/Tilt
2. P/T
Speed
2.Group-1
2. Video
Mode 2. Remote
Source 2. Tally
Light
3. PAN
Torque
3. Group-2
3. HDMI
Mode
3. Set RS-422
3. Model
No.
4. Tilt
Torque
4. Group-3 4. Escape 4. Set DVIP
4. Reset
All
5. Pan
Offset
5. Group-4 5. Set IR
5. Update
Software
6. Tilt Offset 6. Group-5
6. Set Remote
Out
6. Escape
7. Pan Min
Limit
7. Group-6
7. PTZ INFO.
output
OSD MENU
1: Set Motor
2: Memory
3: Video Mode
4: Remote Control
5: System
6: Reset P/T
7: Escape