GeChic On-Lap 1102E 11.6" 16:9 Portable IPS Monitor - Manual (Page 18)

The power indicator shows blue light while charging. After about five hours, the battery can be fully
charged. The power indicator light will extinguish automatically, indicating that the battery has
saturated. Please then unplug the 5V 2A adapter.
3. Battery Usage
(1)When not connected with the USB power cable, press the power button , and On - Lap1102H
will boot automatically and use the battery power. The power indicator will show " green light ".
(2)Battery Bar Icon: After turning on the monitor (power indicator shows green light), entering the
OSD menu, the upper right corner will show the Battery Power icon. When the icon drops to one bar
or zero bar , it means the battery power is too low. Please turn off monitor and charge the
battery.
PS. When the monitor is off, lithium battery will self - discharge power gradually. It is suggested to
store 1102H with battery capacity more than 3 bars .
4. Battery Charging Bar Description
Fig.: Charging Bar Icon at the upper
right corner of OSD menu
The remaining time is estimated based on brightness 70 and Volume 50 . The power con-
sumes quicker if the brightness and volume is set higher.
When there is only one bar left , the power
voltage drops quickly and the monitor will appear
"Insufficient Power" caution on the screen. Then
the monitor enters ECO Mode or cannot work
normally. please shut down the monitor right
away.
Fig.: Insufficient Power caution
1 2
Power Bar Icon Power Status Remaining Time
About 100% About 4.5 hrs.
About 75% About 3.3 hrs.
About 50% About 2.5 hrs.
About 25% About 0.8 hrs.
Chapter 4 Settings of Extended Display
Section 1 Settings of Extended Display on Windows 10
Click , then select 【 Settings 】→ select 【 System 】→ Select 【 Display 】 →
Choose "Extend these displays" at Multiple displays.
Select "1920x1080" at Resolution; Select "Landscape" at Orientation for horizontal dis-
play, select "Portrait" for vertical display. Click Apply and exit.