GeChic On-Lap 1102E 11.6" 16:9 Portable IPS Monitor User Manual
Page 15
LED Light Description
：
LED Light: It shows
green
light when turning on On
-
Lap Monitor and shows
Orange
light when stand by. There is no light when the monitor is off. When
charging to 1102H's battery, it shows
blue
.
9
Fig.: 1102H Buttons, LED Lights & Kensington Slot Description
Fig.: 1102E/I Buttons, LED Lights & Kensington Slot Description
Hot Keys Description:
Increase Volume/UP: Press this Button to show "Volume bar." In the OSD menu, press this
button to move up or to the left. Press and hold this button to increase the volume continu-
ously.
Decrease Volume/Down: Press this Button to show "Input Source." In the OSD menu, press
this button to move down or to the right. Press and hold this button to decrease the volume
continuously.
Menu/Select: Press the Menu Button to launch OSD panel. In OSD panel, press
this button to select and enter the next page.
Exit: In the OSD panel, press the Exit Button to exit and back to the previous
page.
Power: Press the Power Button to power on/off the Monitor.
If press both "Increase Volume/Down " and "Exit " at the same time, OSD will be reset as
the factory settings.
If press both " Increase Volume/Up " and "Decrease Volume/Down " at the same time, you
can enable "Mute" mode. Press these two buttons again to release mute mode.
If press both
" Menu " and "Decrease Volume/Down " at the same time, you can lock the
power button. Press these two buttons again to unlock power button.
If press both
" Menu " and "Increase Volume/Up " at the same time, you can lock the OSD
buttons. Press these two buttons again to unlock OSD buttons.
Section 2 OSD Description
When turning on On
-
Lap monitor at the first time, the "Language Select" menu ap-
pears on the left top. Please press " Menu/Select" button to choose the language
you like, then the "Language Select" menu won't appear next time. If press "Exit"
button to disable the "Language Select" menu, it will appear again when power-
ing on the monitor next time.