Connecting to a component video source – Epson PowerLite 1781W 3200-Lumen WXGA 3LCD Projector User Manual
Page 35
35
1.
Connect the MHL cable or adapter to your device's Micro-USB port.
2.
If you are using an MHL adapter, connect it to an MHL-compatible HDMI cable.
3.
Connect the other end of the cable to the projector's
HDMI
port.
Note:
The projector converts the digital audio signal sent from your video source into a mono analog
signal for the internal speaker.
Parent topic:
Connecting to a Component Video Source
If your video source has component video ports, you can connect it to the projector using an optional
component-to-VGA video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1.
Connect the component connectors to your video source's color-coded component video output
ports, usually labeled
Y
,
Pb
,
Pr
or
Y
,
Cb
,
Cr
. If you are using an adapter, connect these connectors
to your component video cable.