Input signal settings - signal menu – Epson PowerLite 1781W 3200-Lumen WXGA 3LCD Projector User Manual
Page 120
120
Note:
The
Brightness
setting does not affect lamp brightness. To change the lamp brightness mode,
use the
Power Consumption
setting.
Note:
The
Noise Reduction
setting is not available if you have set the
Deinterlacing
setting to
Off
, or
selected a digital RGB or interlaced (480i/576i/1080i) input signal.
Parent topic:
Related references
Available Color Modes
Projector Setup Settings - ECO Menu
Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:
You can restore the default settings of the
Position
,
Tracking
, and
Sync
settings by pressing the
Auto
button on the remote control.
To change settings for an input source, make sure the source is connected and select that source.