Replacing the remote control batteries – Epson PowerLite 1781W 3200-Lumen WXGA 3LCD Projector User Manual
Page 146
146
1.
Turn on the projector.
2.
Press the
Menu
button.
3.
Select the
Reset
menu and press
Enter
.
4.
Select
Reset Lamp Hours
and press
Enter
.
You see a prompt asking if you want to reset the lamp hours.
5.
Select
Yes
and press
Enter
.
6.
Press
Menu
or
Esc
to exit the menus.
Parent topic:
Related tasks
Replacing the Remote Control Batteries
The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.
Caution:
Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
This manual is related to the following products: