Resetting the lamp timer – Epson PowerLite 1781W 3200-Lumen WXGA 3LCD Projector User Manual
Page 145
145
9.
Replace the lamp cover and tighten the screw to secure it.
Note:
Be sure the lamp cover is securely installed or the lamp will not come on.
Reset the lamp timer to zero to keep track of the new lamp’s usage.
Parent topic:
Related references
Optional Equipment and Replacement Parts
Related tasks
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement
message and to keep track of lamp usage correctly.
Note:
Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage
information.
This manual is related to the following products: