Sony HDVF-EL30 0.7" FHD OLED Viewfinder with 3.5" Display for 4K/HD Cameras - Manual (Page 58)

58
[Focus] (SRG-XB25 only)
This is the setting related to the focus.
[Focus mode] (FOCUS - MODE)
Select the focus mode.
[Auto]: The focus is automatically adjusted.
[Manual]: The focus can be adjusted by
using the , , and
buttons of the control panel displayed
in the main viewer.
[AF sensitivity]
Select the sensitivity for automatic focus
adjustment.
[AF frame]
Set the frame area for automatic focus
adjustment.
[Focus near limit]
Set the range at which to automatically
focus. If a subject is nearer than the set
range, it will not be focused. The value is for
reference.
Note
Select [Manual] and adjust the focus
manually when shooting the following
objects.
• White walls and other objects without
contrast
• Objects behind glass
• Objects with horizontal stripes
• Objects on which bright lights are cast or
reflected
• Nightscapes and other dark objects with
blinking lights
When set to [Manual], the focus may drift in
environments with large temperature
variations. In this case, adjust the focus
manually.
[PTZ mode]
Set the pan/tilt control mode using the
8-direction arrow buttons (page 42) and the
zoom control mode using the / buttons
(page 42). Select [Normal] or [Step].
[PTZ mode]
[Normal]:
When you click the mouse, the
camera starts panning, tilting or
zooming, and the operation continues
while you hold down the mouse. To
stop the operation, release the mouse.
[Step]: Each time you click the mouse, the
camera moves (pans, tilts or zooms)
according to the set level. If you keep
the mouse held down for 1 second or
more, the operation mode is
temporarily changed to [Normal].
When you release the mouse, camera
operation stops and the [Step] mode is
restored.
When you select [Step], the [Zoom level]
value can be selected.
[Zoom level]
Select the camera transition level from [1] to
[10] by clicking / for zooming.
Selecting [10] provides the maximum
transition level.
Notes
• When [Video out] > [Resolution] is set to
3840×2160/59.94p or 50p and [Output
source] is set to [HDMI+Stream], operation
is not supported.
• Pan and tilt operation is supported only
when using digital zoom.
• The available pan/tilt operation range is
the area at the Wide end of digital zoom.
[Preset position] tab
You can store camera pan, tilt, and zoom
positions up to 256 positions. For details on the
settings that can be stored, see “Preset Items”
(page 66).
Note
The camera works with the setting registered to
Preset 1, when the power of the camera is turned
on. Register Preset 1 beforehand for turning on
the camera with the specific settings.
Preset position list
Display the numbers and names of the
registered presets.
Select the preset to operate.
Preview screen
Monitor the images and perform the preset
setting.
[Set]
Store the current pan, tilt, zoom positions
and camera settings in the selected preset.