beautypg.com

Zoom menu (srg-xp1 only), Picture/optical filter menu, Zoom – Sony HDVF-EL30 0.7" FHD OLED Viewfinder with 3.5" Display for 4K/HD Cameras User Manual

Page 32: Picture

background image

32

ZOOM Menu (SRG-XP1

only)

The ZOOM menu is used to select the zoom

mode.

You can set the menu from the Administrator

menu on a web browser.

For details, see “[PTZF control] tab” (page 57).

ZOOM

MODE (Zoom - Zoom mode)

Select the zoom mode.

[PIXEL ZOOM]:

An image is zoomed with little

deterioration of image quality over the

optical region.

[DIGITAL]:

3x pixel zoom and 2x digital zoom for

a total of up to 6x zoom.

[OFF]:

Turn zoom function off.

Note

[PIXEL ZOOM] supports zoom of up to 2x at

1080p resolution, and up to 3x at 720p

resolution. This does not function for other

resolutions.

PICTURE/OPTICAL

FILTER Menu

The PICTURE/OPTICAL FILTER menu is used to

adjust picture quality improvement features and

optical filters.

You can set the menu from the Administrator

menu on a web browser.

For details, see “[Picture] tab” (page 49) or “[Day/

Night ICR] tab (SRG-XB25 only)” (page 52).

PICTURE

NOISE REDUCTION

You can obtain clearer images by removing

unnecessary noise (fixed pattern and

randomized noise) with [NOISE REDUCTION].

Select from [OFF] or level [1] through level [3].

2D NR LEVEL (Picture - 2DNR)

Select from [OFF] or level [1] through level [3] for

noise reduction.

3D NR LEVEL (Picture - 3DNR)

Select from [OFF] or level [1] through level [3] for

noise reduction.

FLICKER CANCEL (Picture - Flicker cancel)

When set to [50Hz], the flicker correction is

enabled for a power supply frequency of 50 Hz.

When set to [60Hz], the flicker correction is

enabled for a power supply frequency of 60 Hz.

When this is turned [OFF], the flicker correction

feature becomes disabled.

Note

Depending on conditions such as the type of

illumination and shutter speed, the flicker

correction feature may not be effective.

If the shooting frame rate is close to the power

supply frequency, the flicker correction feature

may not be able to fully remove flickers even

when it is enabled. If this happens, use the

electronic shutter.

We recommend to set [FLICKER CANCEL] to [OFF]

under lights where no flicker is generated, such

as outdoors.

This manual is related to the following products: