Panel descriptions – Roland 6-Channel HD Video Switcher with Audio Mixer & PTZ Camera Control (1 RU) User Manual
Page 9
9
Panel Descriptions
PHONES jack
Connect headphones
to this jack.
You can choose from
PGM/1, PVW/2, or
AUX/3 bus as the
output.
Stereo 1/4-inch
phone plug
Pin assignment of AUDIO IN 1–4 jacks (TRS)
1: GND
2: HOT
TIP: HOT
RING: COLD
SLEEVE: GND
3: COLD
2: HOT
1: GND
3: COLD
Pin assignment of AUDIO OUT connectors (XLR)
1: GND
2: HOT
TIP: HOT
RING: COLD
SLEEVE: GND
3: COLD
2: HOT
1: GND
3: COLD
AUDIO OUT connectors/jacks (XLR and RCA)
Connect them to an audio recording deck, amplifier, speakers, or other
such equipment. You can choose from PGM/1, PVW/2, or AUX/3 bus as
the output.
USB MEMORY port
Connect a USB flash drive to this port.
You use it when importing still images
(p. 20) or when saving or loading
settings for the unit (p. 34).
* When using a USB flash drive for the
first time, you must format it using
the XS-62S (p. 34).
* Never turn off the power or remove
the USB flash drive while the USB
flash drive is being accessed.
RCA
phono
plug
XLR
plug
AUDIO IN 5/L, 6/R jacks
These jacks input audio signals
from video decks, CD players, and
other such audio equipment.
AUDIO IN 1–4 jacks (TRS)
These jacks input audio signals
from microphones, audio
mixers, and other such audio
equipment.
1/4-inch TRS
phone plug
Rear panel
Front panel
Audio output
connectors
Audio output
connectors
Audio input connectors
[PHONES] knob
This adjusts the volume level for
headphones.