Roland 6-Channel HD Video Switcher with Audio Mixer & PTZ Camera Control (1 RU) - Manual (Page 31)

31
Audio Operations
Applying audio follow to AUDIO IN 1–5/6
1. Select the [MENU] button 0 “AUDIO FOLLOW.”
2. From among “AUDIO IN 1” through “AUDIO IN 5/6,”
select the input audio you want to use with Audio
Follow.
3. Use the [VALUE] knob to specify the video channel
to use with Audio Follow.
Value Explanation
INPUT1–8
This sets the video channel to interlink with
input audio using Audio Follow.
Audio from AUDIO IN 1–5/6 is muted out for
video channels other than what you specified.
OFF This assigns no video channel to Audio Follow.
4. Press the [VALUE] knob to apply the setting.
5. Press the [MENU] button to quit the menu.
Separating Discrete Analog Input Audio
Streams and Adding Them to SDI Video
The SDI OUT connectors on the XS-62S accommodate eight
channels of embedded audio. The assigned bus (stereo audio) and
the analog input audio (AUDIO IN 1–5/6) can be added to the SDI
connector.
* The HDMI OUT connectors accommodate two channels of
embedded audio. The assigned bus (stereo audio) can be added
to the HDMI connector.
The audio shown below is assigned to the respective channels of
SDI embedded audio.
SDI embedded-audio
channel number
Assigned audio
Channel 1 The L-channel of the bus
Channel 2 The R-channel of the bus
Channel 3 AUDIO IN 1
Channel 4 AUDIO IN 2
Channel 5 AUDIO IN 3
Channel 6 AUDIO IN 4
Channel 7 AUDIO IN 5/L
Channel 8 AUDIO IN 6/R
Using this feature lets you separate up to six discrete channels of
analog input audio and add it to SDI video.
As a Backup for Visual or Sound Recording...
Digital audio is extracted from the SDI embedded audio one
channel at a time, so after visual recording or sound recording,
you can edit the audio channel by channel.
For Multilingual Support...
Taking multilingual narration or other such audio, making it
embedded audio and adding it to SDI video lets you later extract
and use the digital audio for the required language.