Roland 6-Channel HD Video Switcher with Audio Mixer & PTZ Camera Control (1 RU) - Manual (Page 10)

10
Panel Descriptions
Multi-view Monitor Display
The output of the HDMI OUT 3 connector can display a list of input/output videos, an audio level meter, and a menu screen.
* Multi-view monitor display is available when the HDMI OUT 3 connector’s “OUTPUT ASSIGN” (p. 16) is set to “MULTI-VIEW.”
* When you press the [MENU] button, the menu appears in the screen (OSD menu). It shows the same content as the menu shown on the
built-in display (p. 11). Label names, tally borders, and the audio level meter are hidden while the OSD menu is displayed.
1
3
2
# Name Explanation
1 PVW/2 (preview) section This displays the video of the PVW/2 bus.
This displays the level meter of each bus.
Red (Excessive)
Yellow (Suitable)
Green (Insufficient)
(dB)
-30
-20
-6
0
-50
2 PGM/1 (program) section This displays the video of the PGM/1 bus.
3 Channel section
This displays video input via channels 1–6 and still images assigned to channels 7 and 8.
The PGM/1 bus video and PVW/2 bus video are displayed with tally borders.
Channel Information
1
2
3
1 When the Audio Follow feature is on (p. 30), the
“A.F” symbol is displayed.
2 When video or a still image is being sent to the
AUX/3 bus (p. 18), the “AUX” symbol is displayed.
3 This displays a level meter for SDI IN or HDMI IN
audio.
The level meter indices are the same as for the level
meters of each bus.
MEMO
You can change the settings so that the label names, tally borders, audio level meter, OSD menu, and other such elements displayed on
the multi-view monitor are always hidden.
Select the [MENU] button
0 “SYSTEM,” then set the menu items shown below to “OFF.”
5 MULTI-VIEW LABEL (label names)
5 MULTI-VIEW TALLY (tally borders and AUX symbol)
5 LEVEL METER (audio level meter and A.F symbol)
5 ON SCREEN MENU (OSD menu)