Samsung 390 Series C24F390 24" 16:9 Curved FreeSync LCD Monitor - Manual (Page 31)

31
Picture Size
Change the picture size.
―
This option is not available when FreeSync is enabled.
In PC mode
• Auto : Display the picture according to the aspect ratio of the input source.
• Wide : Display the picture in full screen regardless of the aspect ratio of the input source.
In AV mode
• 4:3 : Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
• 16:9 : Display the picture with an aspect ratio of 16:9.
• Screen Fit : Display the picture with the original aspect ratio without cutting off.
―
The function may not be supported depending on the ports provided with the product.
―
Changing the screen size is available when the following conditions are satisfied.
―
A digital output device is connected using the HDMI/DP cable.
―
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
―
This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to AV .
Screen Adjustment
―
This menu is available in Analog mode only.
―
This menu is only available when Picture Size is set to Screen Fit in AV Mode.
When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally,
select Screen Fit to adjust horizontal position in 0-6 levels.
Configuring H-Position & V-Position
H-Position : Move the screen to the left or right.
V-Position : Move the screen up or down.
Configuring Coarse
Adjust the screen frequency.
―
This menu is available in Analog mode only.
Configuring Fine
Fine-adjust the screen to obtain a vivid picture.
―
This menu is available in Analog mode only.