Samsung 390 Series C24F390 24" 16:9 Curved FreeSync LCD Monitor - Manual (Page 19)

19
Installation
Attaching the Stand (C22F390FH* / C22F392FH* / C24F390FH* / C24F392FH* / C24F394FH* / C24F399FH* /
C27F390FH* / C27F391FH* / C32F391FW*)
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
―
The exterior may differ depending on the product.
1 2 3
Insert the stand neck into the stand base in the
direction shown in the figure.
Check that the stand neck is firmly connected. Tightly fasten the connecting screw at the bottom of the stand base. Place the protective Styrofoam (cushion) included in
the package on the floor and place the product facing
down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
Hold the back of the monitor as shown in the figure.
Push the assembled stand into the main body in the
direction of the arrow as shown in the figure.
- Caution
Do not hold the product upside down only by the stand.
- Caution
Do not press down on the monitor. There is a risk of damaging the monitor.