Canon EOS 1D X Mark II - Manual (Page 99)

99
Synchronizing the Time
5
Select [Wireless].
 Select [OK] and press <0> to go to
the next screen.
6
Set up the master camera.
 Select [Master], then press <0>.
 Select [OK] and press <0> to go to
the next screen.
 When the next screen is displayed,
the master camera is ready. Go to
step 7 to set up the slave cameras.
7
Set up the slave cameras.
 After configuring the slave camera
settings following steps 1 to 5 on the
preceding page, select [Slave].
 Select [OK] and press <0> to go to
the next screen.
 Select [OK] on the displayed screen.
 To set the time on multiple slave
cameras, follow these steps on all
slave cameras.
 On the master camera’s LCD monitor,
the number of slave cameras
detected is displayed.