Canon EOS 1D X Mark II - Manual (Page 121)

121
Responding to Error Messages
What to check on the transmitter
 On the transmitter, DNS address is set to [Manual setting]. Is
this the correct setting?
 If no DNS server is used, set the transmitter’s DNS address setting
to [Disable] (p.144).
 On the transmitter, does the DNS server’s IP address setting
match the server’s actual address?
 On the transmitter, set the IP address that matches the address of
the DNS server used (p.138, 144).
What to check on the DNS server
 Is the power of the DNS server on?
 Turn on the DNS server.
 Are the DNS server settings for IP addresses and the
corresponding names correct?
 On the DNS server, make sure IP addresses and the
corresponding names are entered correctly.
 Is the DNS server working correctly?
 Check the DNS server settings to make sure the server is working
correctly as a DNS server.
 If applicable, ask your network administrator to ensure that the
DNS server is available.
What to check on the network as a whole
 Does your network include a router or similar device that
serves as a gateway?
 If applicable, ask your network administrator for the network
gateway address and enter it on the transmitter (p.138, 144).
 Make sure that the gateway address setting is correctly entered on
all network devices, including the transmitter.
22: No response from DNS server