Responding to error messages, If [waiting to retry transfer...] is displayed – Canon EOS 1D X Mark II User Manual
Page 118
118
If a wireless setting error is displayed on the camera’s LCD monitor,
refer to the examples of corrective actions in this section to eliminate
the cause of the error. In case of errors, the
camera blinks in red. The error details can also be checked under the
[53] tab [Communication settings] 9 [Network settings] 9 [Error
description].
Click the error code number’s page in the following chart to jump to the
corresponding page.
If [Waiting to retry transfer...] is displayed
If image transfer via FTP fails after
shooting, the screen on the left is
displayed, and the camera’s
lamp blinks in red. Check the error code
number and eliminate the cause of the
error.
Once the cause of the error is eliminated, the images whose transfer
previously failed will be re-transferred automatically.
Note that when you cancel image transfer, or turn off the camera, the
image will not be re-transferred automatically. See page 48 and transfer
the image.
Responding to Error Messages
11 (p.119)
22 (p.121)
23 (p.122)
41 (p.124)
42 (p.126)
43 (p.126)
46 (p.128)
47 (p.128)
61 (p.129)
62 (p.129)
63 (p.130)
66 (p.131)
67 (p.132)
68 (p.132)
71 (p.133)
72 (p.133)
73 (p.133)
82 (p.134)
83 (p.134)
91 (p.134)