Canon EOS 1D X Mark II - Manual (Page 32)

32
Connecting to a Detected Network Manually
 Enter the encryption key (password) specified for the access point.
For details on the specified encryption key, refer to the access
point’s instruction manual.
 The screens displayed in steps 2 to 4 below vary depending on the
authentication and encryption specified for the access point.
 Go to page 34 when the [IP address set.] screen is displayed
instead of the screens for steps 2 to 4.
2
Select a key index.
 The [Key index] screen is displayed
only if WEP encryption is used by the
access point.
 Select the key index number
specified for the access point, then
press <0>.
 Select [OK] and press <0> to go to
the next screen.
3
Select the format and the number
of characters used for the key.
 Select [OK] and press <0> to go to
the next screen.
Entering the Access Point Encryption Key