Canon EOS 1D X Mark II - Manual (Page 57)

57
Configuring EOS Utility Connection Settings
4
Click [Connect] on the computer.
 Select the camera to connect to, then
click [Connect].
 If multiple cameras are displayed,
identify the camera to connect to by
its MAC address displayed on the
camera’s LCD monitor.
 The MAC address can also be
checked on the [Function settings]
screen (p.114).
5
Select [OK].
 When the camera detects the
computer on which you clicked
[Connect] in step 4, the screen on
the left is displayed.
 Select [OK] and press <0>. A
connection completion screen will
appear.
6
Select [OK].
 Press <0> to return to the [Network
settings] screen.
 The lamp on the camera will
light up in green.
 Settings information is stored in the
camera. It is not stored in the
transmitter.
The settings for connecting to EOS Utility are now complete.
 There is no need to complete pairing again if you will continue using
a particular camera to which the transmitter is attached and
computer together after pairing without changing the settings.
Operation on the Camera-2