Canon EOS 1D X Mark II - Manual (Page 11)

11
Set the camera’s power switch to <2> before attaching the
transmitter.
The transmitter is powered by the camera. Ensure the camera
battery has sufficient charge. If the battery level drops to 19% or
less, you cannot transfer captured images.
1
Open the terminal cover on the
camera.
 Pull out the system extension
terminal cover and rotate it toward the
front.
2
Attach the transmitter.
 Align the transmitter terminal and
attachment pin with the
corresponding camera terminal and
hole.
 Push the terminal firmly into the
camera.
 As you push the terminal into the
camera with your left index finger,
turn the tightening screw until it stops
rotating to attach the transmitter
securely.
Removing the transmitter
 Set the camera’s power switch to <2>.
 Loosen the tightening screw until it spins freely.
 Pull the terminal out of the camera.
Attaching to the Camera