Canon EOS 1D X Mark II - Manual (Page 125)

125
Responding to Error Messages
What to check on the FTP server
 Is the FTP server working correctly?
 Configure the computer correctly to function as an FTP server.
 If applicable, ask your network administrator for the FTP server
address and port number, then enter them on the transmitter.
 Is the power of the FTP server on?
 Turn on the FTP server. The server may have been turned off
because of an energy-saving mode.
 On the transmitter, does the FTP server’s IP address setting
(in [Address]) match the server’s actual address?
 Configure the IP address on the transmitter to match the actual
FTP server address (p.38).
 Is a firewall or other security software enabled?
 Some security software uses a firewall to restrict access to the FTP
server. Change the firewall settings to allow access to the FTP
server.
 You may be able to access the FTP server by setting [Passive
mode] to [Enable] on the transmitter (p.111).
 Are you connecting to the FTP server via a broadband router?
 Some broadband routers use a firewall to restrict access to the
FTP server. Change the firewall settings to allow access to the
FTP server.
 You may be able to access the FTP server by setting [Passive
mode] to [Enable] on the transmitter (p.111).