Selecting a range specifying all images at once, Rotating images – Canon PowerShot SX540 HS User Manual
Page 98
98
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Rotating Images
Still Images
Movies
Change the orientation of images and save them as follows.
1
Choose [ ].
●
Press the [ ] button, and then choose
[ ] in the menu (= 28).
2
Rotate the image.
●
Press the [ ] or [ ] button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the [ ] button to complete the
setting.
●
Rotation is not possible when [Auto Rotate] is set to [Off]
(= 99).
Selecting a Range
1
Choose [Select Range].
●
Following step 2 in “Choosing a Selection
Method” (= 97), choose [Select
Range] and press the [ ] button.
2
Choose images.
●
Follow steps 2 - 3 in “Selecting a Range”
3
Erase the images.
●
Press the [ ] button to choose [Erase],
and then press the [ ] button.
Specifying All Images at Once
1
Choose [Select All Images].
●
Following step 2 in “Choosing a Selection
Method” (= 97), choose [Select All
Images] and press the [ ] button.
2
Erase the images.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.