Changing the is mode settings, Deactivating image stabilization – Canon PowerShot SX540 HS User Manual
Page 53
53
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Recording Movies with Subjects at the Same Size
Shown before Shooting
Still Images
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for image straightening and correction
of significant camera shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization and cancel Auto Level.
●
Follow the steps in“Deactivating Auto
Level” (= 52) to set [ Auto level] to
[Disable].
●
Access the [IS Settings] screen as
described in step 1 in “Deactivating
●
Choose [Dynamic IS], and then choose
●
You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
●
When [IS Mode] is set to [Off] (= 53), [Dynamic IS] is not
available.
●
When the movie quality is [
], Dynamic IS is set to [Standard]
and cannot be changed.
Changing the IS Mode Settings
Still Images
Movies
Deactivating Image Stabilization
When the camera is held still (as when shooting from a tripod), you should
set image stabilization to [Off] to deactivate it.
1
Access the setting screen.
●
Press the [
] button, choose [IS
Settings] on the [ ] tab, and then press
the [ ] button (= 29).
2
Configure the setting.
●
Choose [IS Mode], and then choose the
desired option (= 29).
Continuous
Optimal image stabilization for the shooting conditions is
automatically applied (Intelligent IS) (= 37).
Off
Deactivates image stabilization.