Deactivating auto level, Magnifying the area in focus – Canon PowerShot SX540 HS User Manual
Page 52
52
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Deactivating Auto Level
Still Images
Movies
Normally, auto leveling keeps the movie image horizontally level during
recording. To cancel this feature, choose [Disable].
●
Press the [
] button, choose
[ Auto level] on the [ ] tab, and then
choose [Disable] (= 29).
●
Once movie recording begins, the image display area changes
and subjects are enlarged (= 53).
Magnifying the Area in Focus
Still Images
Movies
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1
Configure the setting.
●
Press the [
] button, choose [AF-
Point Zoom] on the [ ] tab, and then
2
Check the focus.
●
Press the shutter button halfway. The
face detected as the main subject is now
magnified.
●
To restore the original setting, choose
[Off] in step 1.
●
The area in focus is not magnified in the following cases when the
shutter button is pressed halfway.
-
If a face was not detected, if the person is too close to the
camera and their face is too large for the screen, or if the
camera detects subject movement
-
When digital zoom is used (= 38)
-
When Tracking AF is used (= 75)
-
When a TV is used as a display (= 148)
●
Not available in [
] mode.