Canon PowerShot SX540 HS - Manual (Page 76)

76
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
● The camera can detect subjects even if you press the shutter
button halfway without pressing the [ ] button. After your shot,
[ ] is displayed in the center of the screen.
● When shooting in [ ] mode (= 73), press and hold the [ ]
button for at least one second.
● If [Face ID] is set to [On], names will not display when registered
people are detected, but the names will be recorded in the still
images (= 45). However, the name is displayed when a
registered person is selected as a subject.
Shooting with Servo AF
Still Images Movies
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1
Configure the setting.
● Press the [ ] button, choose [Servo
AF] on the [ ] tab, and then choose [On]
(= 29).
2
Focus.
● The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
2
Choose a subject to focus on.
● Aim the camera so that [ ] is on the
desired subject, and then press the [ ]
button.
● When the subject is detected, the camera
beeps and [ ] is displayed. (Even if the
subject moves, the camera will continue
to track the subject within a certain
range.)
● If no subject is detected, [ ] is displayed.
● To cancel tracking, press the [ ] button
again.
3
Shoot.
● Pressing the shutter button halfway
changes [ ] to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(= 76).
● Press the shutter button all the way down
to shoot.
● Even after your shot, [ ] is still displayed
and the camera continues to track the
subject.
● [Servo AF] (= 76) is set to [On] and cannot be changed.
● Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
● [AF-Point Zoom] on the [ ] tab is not available.
● [ ] is not available.