Canon PowerShot SX540 HS - Manual (Page 95)

95
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2 Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
5
Tv, Av, and M Mode
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Using the Menu”
(= 94), choose [Select Range] and
press the [ ] button.
2
Choose a starting image.
● Press the [ ] button.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
Choose an ending image.
● Press the [ ] button to choose [Last
image], and then press the [ ] button.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
● Images before the first image cannot be
selected as the last image.
Choosing Images Individually
1
Choose [Select].
● Following step 2 in “Using the Menu”
(= 94), choose [Select], and press the
[ ] button.
2
Choose an image.
● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button to
display [ ].
● To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
● Repeat this process to specify other
images.
3
Protect the image.
● Press the [ ] button to display the
confirmation screen.
● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.