Sound settings, Deactivating the wind filter using the attenuator, Deactivating the wind filter – Canon PowerShot SX720 HS User Manual
Page 67: Using the attenuator, Disabling auto slow shutter, Correcting severe camera shake
67
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●
[Dynamic IS] is not available when [IS Mode] is set to [Off]
(= 52).
●
When the movie quality is [
], it is set to [Standard] and
cannot be changed.
Sound Settings
Still Images
Movies
Deactivating the Wind Filter
Noise caused by strong wind can be reduced. However, the recording
may sound unnatural when this option is used when there is no wind.
In this case, you can deactivate the wind filter.
●
Press the [
] button, choose [Wind
Filter] on the [ ] tab, and then choose
[Off] (= 29).
Using the Attenuator
The attenuator can reduce audio distortion in noisy environments.
However, in quiet environments, it lowers the sound-recording level.
●
Press the [
] button, choose
[Attenuator] on the [ ] tab, and then
choose the desired option (= 29).
Disabling Auto Slow Shutter
Still Images
Movies
Auto slow shutter can be disabled if movement in movies is rough.
However, under low light, movies may look dark.
●
Press the [
] button, choose
[ Auto slow shutter] on the [ ] tab,
and then choose [Disable] (= 29).
●
To restore the original setting, repeat this
process but choose [Enable].
●
Auto slow shutter is only available for [
] movies.
Correcting Severe Camera Shake
Still Images
Movies
Counteract severe camera shake, such as when recording while moving.
The portion of images displayed changes more than for [Standard], and
subjects are further enlarged.
●
Follow the steps in “Recording Movies
with Subjects at the Same Size Shown
before Recording” (= 53) to choose
[High].