Canon PowerShot SX720 HS - Manual (Page 38)

38
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Common, Convenient Features
Zooming In Closer on Subjects (Digital Zoom)
Still Images Movies
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 160x enlargement.
1
Move the zoom lever toward [ ].
● Hold the lever until zooming stops.
● Zooming stops at the largest possible
zoom factor (before the image becomes
noticeably grainy), which is then indicated
on the screen.
2
Move the zoom lever toward [ ]
again.
● The camera zooms in even closer on the
subject.
● (1) is the current zoom factor.
● Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The zoom bar is color-coded to indicate the
zoom range.
- White range: optical zoom range where the image will not
appear grainy.
- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear
grainy.
● Because the blue range will not be available at some recording
pixel settings (= 49), the maximum zoom factor can be
achieved by following step 1.
(1)
On-Screen Frames
Still Images Movies
In [ ] mode, a variety of frames are displayed once the camera
detects subjects you are aiming the camera at.
● A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames
are displayed around other detected faces. Frames follow moving
subjects within a certain range to keep them in focus. However, if the
camera detects subject movement, only the white frame will remain on
the screen.
● When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus
and image brightness are constantly adjusted (Servo AF).
● Depending on the scene or subject, no frames may be displayed,
frames may not displayed around desired subjects, or frames may
be displayed on the background or similar areas. Try shooting in
[ ] mode (= 70).